* Max Hold Function
* Data Hold Function
* Aux output JACKS
* T1-T2 differential measurement

Price: 5,200.00 THB

Quantity :

* Type K. J. E. T. thermocouple input
* Dual channels with multi-functions (T1, T2 & T1-T2)
* Built-in thermo printer with programmable Time interval setting (1304)
* Data-logging capacity via RS-232 (1305)

Price: 28,900.00 THB

Quantity :

* Max Hold Function
* Data Hold Function
* Aux output JACKS
* T1-T2 differential measurement

Price: 4,830.00 THB

Quantity :

* Highly accurate thermometer with thermocouple K, J, E, T, R, S, N type.
* Dual input function T1/T2 temperature display. (1316)
* 7500 DataLogging capacity.
* Warning beeper with HI/LO setting.
* MAX/MIN with TIME, MAX-MIN AVG, HOLD function.
* ℃ / ℉ / K User-Selective.

Price: 13,500.00 THB

Quantity :

Measuring Range

K - Type : -200℃ to +1372℃ (-328℉ to +2501℉)
J - Type : -210℃ to +1200℃ (-346℉ to +2192℉)
E - Type : -150℃ to +1000℃ (-238℉ to +1832℉)
T - Type : -250℃ to +400℃ (-418℉ to +752℉)
R and S - Type : 0℃ to +1767℃ (+32℉ to +3212℉)
N - Type : -200℃ to +1300℃ (-328℉ to +2372℉)
Display Resolution 0.1℃ / ℉ / K <2000°
1.0℃ / ℉ / K ≦2000°
Measurement Accuracy (According to ITS-90) K, J, E, T and N-Type : ±[0.05% of reading +0.3℃ (0.6℉)]
[below-100℃ (-148℉) : add 0.15 % of reading for K-, J-, E-, and N-Type ; and 0.45% of reading for T-Type]
R-and S-Type : ±[0.05% of reading + 0.4℃ (0.8℉)]
Temperature Coefficient 0.01% of reading + 0.03℃ per ℃ (0.05 ℉ per ℉) outside the specified +18℃ to 28℃ (+64℉ to +82℉) range
[LCD ranging : below –100℃ (-148℉) : add 0.04% of reading for K-, J-, E, and N- Type; and 0.08% of reading for T- Type]
Maximum Differential Common Mode Voltage 1V (Maximum voltage difference between T1 and T2)
Input Protection 30V maximum input voltage on any
Combination of input Connector
Sampling Rate 1 time/sec
Operating/Storage Conditions 0 ℃ ~ 40 ℃＜ 80% RH
–10 ℃ ~ 60 ℃＜ 70% RH
Power Source 6 pcs size AAA Battery
Battery Life Approx. 300hours. (not including backlight and beeper)
Size 152(L) ×72(W) ×37(H)mm
Weight Approx. 300g
Accessories Instruction manual, Battery

Price: 7,150.00 THB

Quantity :

* Type "K" Thermocouple Input
* Switchable Resolution 0.1° / 1°
* With ℃ & ℉ switching
* Max / MIN Function
* Data Hold Function
* Room Temperature Compensated
* T1 & T2 dual points display
* T1 - T2 differential measurement

Price: 4,450.00 THB

Quantity :

* Pt 3916/3926/385 RTD standard.
* 7500 DataLogging capacity. (1317)
* Warning beeper with HI/LO setting.
* Time setting.
* MAX / MIN with TIME, MAX-MIN AVG Hold function.
* ℃ / ℉ / K User-Selective.
* Back - Light LCD display.

Price: 7,150.00 THB

Quantity :

* Max Hold Function
* Data Hold Function
* Aux output JACKS
* T1 * 0.1 ℃ /0.2 ℉ Resolution
* Infrared: -20 ℃~500℃
* Thermocouple input "K": -50 ℃ ~ 1370 ℃
* Built-in Laser sighting / Backlight LCD display
* Data Memory and Read Capacity 20 sets. (TES-1322A)
* Adjustable & Visible Alarm
* MAX/MIN Reading
-T2 differential measurement

Price: 9,950.00 THB

Quantity :

* Max Hold Function
* Data Hold Function
* Aux output JACKS
* T1 * 0.1 ℃ /0.2 ℉ Resolution
* Infrared: -20 ℃~500℃
* Thermocouple input "K": -50 ℃ ~ 1370 ℃
* Built-in Laser sighting / Backlight LCD display
* Data Memory and Read Capacity 20 sets. (TES-1322A)
* Adjustable & Visible Alarm
* MAX/MIN Reading
-T2 differential measurement

Price: 6,400.00 THB

* Type "K" Thermocouple Input.
* Switchable Resolution 0.1° / 1° .
* With ℃ & ℉ switching.
* Max / MIN Function.
* Data Hold Function.
* Flip-up stand.

Price: 3,640.00 THB

* Pt 3916/3926/385 RTD standard.
* 7500 DataLogging capacity. (1317)
* Warning beeper with HI/LO setting.
* Time setting.
* MAX / MIN with TIME, MAX-MIN AVG Hold function.
* ℃ / ℉ / K User-Selective.
* Back - Light LCD display.

Price: 6,450.00 THB

Quantity :

* Highly accurate thermometer with thermocouple K, J, E, T, R, S, N type.
* Dual input function T1/T2 temperature display. (1316)
* 7500 DataLogging capacity.
* Warning beeper with HI/LO setting.
* MAX/MIN with TIME, MAX-MIN AVG, HOLD function.
* ℃ / ℉ / K User-Selective.

Price: 12,800.00 THB

Measuring Range

K - Type : -200℃ to +1372℃ (-328℉ to +2501℉)
J - Type : -210℃ to +1200℃ (-346℉ to +2192℉)
E - Type : -150℃ to +1000℃ (-238℉ to +1832℉)
T - Type : -250℃ to +400℃ (-418℉ to +752℉)
R and S - Type : 0℃ to +1767℃ (+32℉ to +3212℉)
N - Type : -200℃ to +1300℃ (-328℉ to +2372℉)
Display Resolution 0.1℃ / ℉ / K <2000°
1.0℃ / ℉ / K ≦2000°
Measurement Accuracy (According to ITS-90) K, J, E, T and N-Type : ±[0.05% of reading +0.3℃ (0.6℉)]
[below-100℃ (-148℉) : add 0.15 % of reading for K-, J-, E-, and N-Type ; and 0.45% of reading for T-Type]
R-and S-Type : ±[0.05% of reading + 0.4℃ (0.8℉)]
Temperature Coefficient 0.01% of reading + 0.03℃ per ℃ (0.05 ℉ per ℉) outside the specified +18℃ to 28℃ (+64℉ to +82℉) range
[LCD ranging : below –100℃ (-148℉) : add 0.04% of reading for K-, J-, E, and N- Type; and 0.08% of reading for T- Type]
Maximum Differential Common Mode Voltage 1V (Maximum voltage difference between T1 and T2)
Input Protection 30V maximum input voltage on any
Combination of input Connector
Sampling Rate 1 time/sec
Operating/Storage Conditions 0 ℃ ~ 40 ℃＜ 80% RH
–10 ℃ ~ 60 ℃＜ 70% RH
Power Source 6 pcs size AAA Battery
Battery Life Approx. 300hours. (not including backlight and beeper)
Size 152(L) ×72(W) ×37(H)mm
Weight Approx. 300g
Accessories Instruction manual, Battery

Price: 6,450.00 THB

* Type "K" Thermocouple Input
* Switchable Resolution 0.1° / 1°
* With ℃ & ℉ switching
* Max / MIN Function
* Data Hold Function
* Room Temperature Compensated
* T1 & T2 dual points display
* T1 - T2 differential measurement

Price: 4,050.00 THB

* Switchable Resolution 0.1° /1.0°
* Single/Dual Channels with
Differential Measurements
* Data Hold Function

Price: 3,340.00 THB

* K/J Type thermocouple input
* Auto ranging
* Dual display LCD
* 8000 Record Data logging Capacity
* Maximum / Minimum / Average reading
* Relative reading
* RS-232 interface (software include)

Price: 10,500.00 THB

* K/J Type thermocouple input
* Auto ranging
* Maximum / Minimum reading
* Relative reading

Price: 5,250.00 THB

* Type K. J. E. T. thermocouple input
* Dual channels with multi-functions (T1, T2 & T1-T2)
* Built-in thermo printer with programmable Time interval setting (1304)
* Data-logging capacity via RS-232 (1305)

Price: 26,400.00 THB

* Max Hold Function
* Data Hold Function
* Aux output JACKS
* T1-T2 differential measurement

Price: 4,330.00 THB

* 0.1dB Resolution
* Range from 26 to 130dB
* A&C frequency weighting
* Fast/Slow Dynamic characteristic
* Maximum with Elapsed time
* Manual data memory and read

* Real-time 1/1-Octave and 1/3-Octave analysis.
* Wide linearity range of 100dB.
* Large display with backlighting.
* Real time clock with calendar.
* Memory max. 10000 records of Lp data.
* RS-232 interface.

* 0.1dB Resolution
* Range from 30 to 130dB
* Fast/Slow dynamic characteristic
* A&C Frequency Weighting

* Measure % Noise Dose / Exposure Time / Sound Level
* Real time clock with calendar
* RS-232 interface

* Wide linearity range of 100dB
* 32000 Records Data logging function
* RS-232 interface
* Real time clock with calendar

* Auto ranging
* 0.1dB Resolution
* Range from 30 to 130dB
* A&C Frequency Weighting
* Fast/Slow dynamic characteristic
* 16000 Records Data logging function
* RS-232 interface

* 0.1dB Resolution
* Maximum hold function
* AUX OUTPUT JACKS

* 0.1dB Resolution
* Maximum hold function
* AUX OUTPUT JACKS

* User calibration factor setting function.
* End-mount light sensor.
* Select either W/m2 or Btu / (ft2*h) units
* Data Hold / MAX / AVG modes.
* Data Memory and Read function. (99 sets.)
* Auto Data memory and RS232 interface to PC. (TES-1333R)

Application
* Meteorology
* agriculture
* solar radiation measurement
* solar power research
* physics and optical laboratories
* solar transmission measurement
* identify high performance windows

* Fast and Easy pH measurement
* Dual LCD display shows PH/ ℃& ℉ or
mV/ ℃&℉ simultaneously
* Logging 99 readings

* 4 LCD Displays with W, PF, V, A
* Easy Plug-in and Test
* RS-232 Computer Interface

* Compact Size
* Trms KW measurement
* AC/DC Current Measurement (AC 600A/DC 600A)
* 600V AC & 600V DC, Ohm/Continuity Beeper
* 600 V AC & 600 V DC. Ohm/Continuity Beeper
* One Touch DCA Zero

* 3-3/4 Digital LCD, 4000 count, Autoranging.
* Trms KW, Current, Voltage measurement.
* AC Current 0.1A to 700A.
* Resistance and Continuity test.
* Data hold & MAX function.
* Pocket size.
* Auto Power off.

* Check current draw in motors and compressors.
* Use MAX/MIN/Recording in the temperature mode to assess efficiency.
* Test run/start capacitors.
* Confirm low voltage control signals.
* Measure flame safeguard device current draw.
* Confirm power sources.

HVAC Application：

* Check current draw in motors and compressors.
* Use MAX/MIN/Rescording in the temperature mode to assess efficiency.
* Test run/start capacitors.
* Confirm low voltage control signals.
* Measure flame safeguard device current draw.
* Confirm power sources.
* Analyze temperature and voltage or current data with the aid of the time stamp.
* Insulation test up to 100M Ω.

Electrical Application：

* Check for energized circuits and balance loads.
* 1 Φ /3 Φ (3P3W/3P4W)Power analyzer.
* Evaluate electrical contacts.
* Capture motor in-rush current readings.
* Determine peak power demand periods.
* Verify line voltage stability.
* Monitor motors and other loads for excess heat.
* Check motor run/start capacitor values.

* True power / Apparent Power / Power Factor
* RS-232 Interface to talk with PC
* Dual display KW + PF, KVA + PF, V+A
* A + Hz, V + Hz
* Datalogging Capacity (4000 Reading)
* Peak/MAX/MIN function
1 Φ 2W, 1 Φ 3W,3 Φ 3W,3 Φ 4W

* RS-232 interface to talk with PC
* 4 digits with dual display LCD
* Amp / Voltage f requency measurement
* Dual display KW+PF , KVA+PF , V+A
* 4000 continuity point data logger , 25 point manual data logger
* True power / apparent power / power factor measurement
* True RMS. V , A , W , cap , lnd , phase indicator
* MIN / MAX measurement
* Peak hold detector
* Dual display A+Hz , V+Hz

EN61010-1
600V Installation CAT III
Pollution Degree 2

* Two 3 1/2 LCD display volts and Amps
simultaneously
* Multi-protections for overload, thermal,
short circuit and reversing polarity
* Adjustable current limiting operation
available

* Output Voltage: 0-30VDC
Max. output Current: 3A
* Power Source AC Input:
110/230VAC +-10%, 50/60Hz
Power Consumption: 150W

* Tests : UTP. FTP. Coax cables, two, three, or
four wire pairs in twisted pair cables and test
all category UTP cables and hardware.
* Verify end-to-end connectivity per EIA/TIA 568
wiring standard.
* Detects wiring problems : Opens, Shorts, mixwires
(Crossed, Reversed, Split pair).

* Test a wide range of UTP cables such as
10Base T , 100Base Tx , 10Base 2 (Coax),
356A , TIA-568A , TIA-568B, etc.
* Can tests for wiring faults such as open,
short , reversed , crossed and split wires.
* Can identify up to 4 different cables at
one end by provided remote identifiers.

* Dual Display, 4-digit LCD reading.
* Spectral Sensitivity close to CIE photopic Curve.
* Measuring Levels Ranging 0.01 to 999900 Lux,0.01 to 99990 fc, Autoranging 5 step.
* Accurate and Instant response.
* Integral illuminance measurement.
* Luminous intensity measurement.
* Data Hold function.
* Data memory and read function.
* Reference value setting for relative or percentage deviation measurement.
* Ripple measurement for STRAY + LIGHT function.
* Time-hold function.
* Point - average function.
* Comparator function.
* Auto power off function.
* CNS 5119 Class Ⅱ .

* Spectrum of photo sensor meets C.I.E.
photopic curve V( l )
* 16000 Records Data logging capacity
* RS-232 interface (software included)
* Measurement of luminous intensity
(PC Software)

* Spectral Sensitivity close to CIE
photopic Curve.
* Measuring Levels Ranging 0 to
400,000 Lux, 0 to 40, 000 fc.
* Accurate and Instant response.
* Data Hold function.
* MAX/MIN function.
* Peak Hold function.

* Spectral Sensitivity close to CIE photo pic Curve
* Cosine Angular corrected
* Analog output jack for recording (TES-1332A/1334A)
* Data Hold function, Peak Hold function for 1334

* Large custom high contrast display.
* Auto lock out if test resister overheats.
* Voltage indication.
* Measure low loop with 0.01 W resolution.
* High loop range permit measurement
of ground spikes.
* Microprocessor controlled.

* Large LCD with analog bar graph and digital display.
* 250V, 500V, 1000V output voltage for insulation M Ω testing.
* 4000M Ω insulation testing with automatically switch to voltage measurement.
* Lo Ω function for testing connections.
* Autodischarge of capacitive voltage charges.
* Last reading HOLD display.
* AC/DC voltage measurement up to 1000V.
* Manual data memory and read function (9 sets).
* Meets EN61557 and IEC1010-1, CAT III 1000V.
* Size : 235(L)x116(W)x54(H)mm (9.3"Lx4.6"Wx2.1"H)

* Innovational logging feature (7000) to memorize all of measurements from the work place
* RS-232 interface with valued software
* 4,000M W /V Reding/10,000M W analog indication
* Backlight illumination
* 3-3/4 Digital LCD, 4000Count
* Auto Range for Mega Ohm range
* 50 segments Log Scaled Analog Display
* Easy to carry testing package
* Tests insulation at rated voltage into a 1mA load
* 200mA short circuit continuity current
* Meet VED0413
* Auto discharge

* 4000M W /1000V, 4000M W /500V, 4000M W /250V
* Power lock for 3 minutes (Auto power off)
* Auto-Zero adjustment
* Data-Hold-Function

* 2000M W /1000V, 200M W /500V, 200M W /250V
* Power lock for 3 minutes (Auto power off)
* Auto-Zero adjustment
* Data-Hold-Function

* Dual LCD display.
* Dew Point Reading.
* Wet bulb Reading.
* MAX/MIN with Time Stamp.
* Data Hold function.
* ℃ & ℉ Switchable.
* Auto Power Off.

* Detachable sensing probe.
* Data Hold & Relative function.
* Dual LCD display with Bargraph indication.
* Datalogging capacity 10,100 dual reading.
(%RH & Temp). (TES-1365)
* Dew Point Reading.
* RS-232 interface & windows software.
(TES-1365)

* Triple LCD Display for RH% Humidity,
T1 for Air Temperature and T2 Type K
Thermometer (-200 o C~ 1333 o C).
* Dew Point Reading.
* Max / Min / Data Hold.
* Real Time Stamp.
* Periodically Print out from Pre-Set time Interval.

* Instant performance of Humidity measurement
by precision thin-film capacity sensor
* Dual display LCD / Clock
* Compact, light weight & Simple operation
* 7000 Record Data logging Capacity (Dual Reading)
* RS-232 interface (software included)

* Laboratory
* Quality Control
* Air-Conditioning
* Process Engineering

* Display of Overlapped Voltage and Current Waveform
* Maximum Demand (MD in W,KW,MW) with Programmable Period
* Harmonics Analysis ( V and I ) to the 50th Order
* Display of 25 Harmonics in One Screen with Waveform
* Display of waveform with Peak Values (512 Samples / Period), Datalogging of 32, 64, 128 or 256 Points/Cycles
* Analysis of Total Harmonics Distortion ( % THD-F )
* Graphic Phasor Diagram
* Programmable PT (1 to 3000) Ratios
* Capture 128 Transient Events ( Time + Cycles + Faults ) with Programmable Threshold(%), Can Also be Reviewed in LCD
* 50000 Records with Programmable Interval ( 1 to 6000 seconds)
* Output of Waveform, Power Parameters and 50 Harmonics at Command.
* Large Dot Matrix LCD Display with Backlight
* Optical Isolated RS-232C Interface
* Smart Datalogging to save Battery Power for Long-term Monitoring
* Built - in Calendar Clock for Data Logging

* Two Current Ranges:300A and 3000A
* Two Output Sensitivity(300 mV and 1V), Versatile for Measuring Instruments
* Input Protection UP to 600V
* Suitable for Any Electrical System
* Wide Bandwidth , Low Phase Shift
* Low Battery Indication

Power Analysis(3005)

* W, KW, H.P.
* VA ,KVA, VAR, KVAR
* PF, Phase Angle( Φ )
* Energy (WH, KWH)
* Dual displays (W+PF, VA+KVAR)
* Balanced 3 Φ Power Quality and Swquence

Harmonics Analysis

* True RMS (V and A)
* 3000 A
* Non-interrupted Harmonic Analysis ( V and A ) to the 50th Order in % and Magnitude
* Analysis of % THD-F and C.F.
* Fast Peak Function (33μs and 39μs)
* Programmable PT (1 to 250 )ratios
* Auto - Power - Off:30 Minutes

Flexible probe , different from normal clamp meter, can pass through obstacles at will and wind many conducting wires simultaneously, max. diameter 170mm

* True RMS
* 3000A
* Voltage Measurement (AFLEX 3002 only)
* Fast Peak Function(30 μs)
* MAX/MIN
* Auto-Power-Off：30 minutes
Flexible probe, diffent from normal clamp meter, can pass through obstacles at will and wind many conductiog wires simultaneously,max.diameter 170mm

* Two Current Ranges:300A and 3000A
* Two Output Sensitivity(300 mV and 1V), Versatile for Measuring Instruments
* Input Protection UP to 600V
* Suitable for Any Electrical System
* Wide Bandwidth , Low Phase Shift
* Low Battery Indication

* Capable of measuring earth voltage.
* Data hold function.
* Auto power off function:
The timer operates automatically about 3 minutes when the " Test Button Switch " are pressed to keep the tester power on.
* 2mA measuring current permits earth resistance tests without tripping earth leakage current breakers in the circuit under test.
* In addition to the facility for precision measurement, test leads for simplified two wire measuring system also supplied as standard accessories.
* Automatic warning when resistance of auxiliary earth spike is in excess of tolerance.
* Designed to meet IEC1010-1 safety standard.
* Zero ohm adjustment.

* Capable of measuring earth voltage.
* Data hold , MAX / MIN function.
* Auto power off function:
The timer operates automatically about 3 minutes when the " Test Button Switch " are pressed to keep the tester power on.
* 2mA measuring current permits earth resistance tests without tripping earth leakage current breakers in the circuit under test.
* In addition to the facility for precision measurement, test leads for simplified two wire measuring system also supplied as standard accessories.(unit can be hung from the neck for simplified measurement).
* Automatic warning when resistance of auxiliary earth. Spikes is in excess of tolerance.
* Designed to meet IEC1010-1 safety standard.

* 50 MHz to 3.5 GHz frequency range.
* For isotropic measurements of electromagnetic fields.
* Non-directional (isotropic ) measurement with three-channel measurement probe.
* High dynamic range due to three-channel digital results processing.
* Configurable alarm threshold and memory function.
* Easy to use

Application
* Wireless LAN (Wi-Fi) detection, installation.
* Spy camera, wireless bug finder.
* Cellular/Cordless phone radiation safety level.
* Microwave oven leakage detection.
* Personal living environment EMF safety.
* RF power measurement for transmitters.
* High frequency (RF) electromagnetic wave field strength measurement.
* Mobil phone base station antenna radiation power density measurement.
* Wireless communication applications (CW , TDMA , GSM , DECT).

* The EMF tester is designed to provide user a quick, reliable and easy way to measure electromagnetic field radiation levels around power lines, home appliances and industrial devices.
* The EMF tester is a cost effective, hand-held instrument designed and calibrated to measure electromagnetic field radiation at different bandwidths down to 50Hz/60Hz.
* Display micro Tesla & milli Gauss in the same tester.
* Data hold, Peak hold function.
* RS-232 Optical inter face. (1394)
* 999 Datalogging capacity.

* The EMF tester is designed to provide user a quick, reliable and easy way to measure electromagnetic field radiation levels around power lines, home appliances and industrial devices.
* The EMF tester is a cost effective, hand-held instrument designed and calibrated to measure electromagnetic field radiation at different bandwidths.
* Display micro Tesla & milli Gauss in the same tester.
* Data hold, Peak hold function
* On-line computer (1391/1392) Data logging (1392) function.

* 3-1/2 Digital LCD, 2000 count.
* Pocket size.
* MAX hold / Data hold function.
* One touch DCA zero.

Quantity :

* 3-1/2 Digital LCD, 2000 count.
* Pocket size.
* MAX hold / Data hold function.

EN61010-1
600V INSTALLATION VAT III
POLLUTION DEGREE2

* Auto-Ranging Frequency measurements
* Auto ZERO mode
* Data Hold mode
* PEAK Hold mode
* True RMS Reading

HVAC Application

* Check current draw in motors and compressors.
* Use MAX/MIN/Recording in the temperature mode to assess efficiency.
* Test run/start capacitors.
* Confirm low voltage control signals.
* Measure flame safeguard device current draw.
* Confirm power sources
* Analyze temperature and power data with the aid of the time stamp.
* Insulation test up to 100M.

Electrical Application

* Check for energized circuits.
* Balance loads.
* Evaluate electrical contacts.
* Capture motor in-rush current readings.
* Determine peak power demand periods.
* Verify line voltage stability.
* Monitor motors and other loads for excess heat.
* Check motor run/start capacitor values.

* Capacitance Measurement ( uF).
* MAX / MIN / Data Hold.
* Phase Rotation Indicator.
* Pos Peak Hold & Neg Peak Hold.
* 1000A AC & 600V AC.

* 3-3/4 Digital LCD with bar-graph
* Auto-ranging off / Data Hold / Peak Hold / MAX/MIN mode
* Zero Adjustment/Relative Reading

* 3-3/4 Digital LCD with bar-graph
* Auto-power off with Data Hold and MAX/MIN mode
* Zero Adjustment/Relative Reading

* ACA: 20A, 200A, 600A
* Continuity Buzzer
* Unit & Sign Display

* 94dB and 114dB Sound Calibration at 1KHz
* Accurate and Simple to use
* Fits 1", 1/2" or 1/4" diameter microphone

* CO 2 : 0 ~ 6,000 ppm range, Diffusion sampling mode.
* Three LCD Display for CO 2 , %RH Humidity and Air Temperature.
* Maintenance free dual wavelength NDIR infrared CO 2 sensor (non-dispersive infrared).
* Continuous or manual data logging (20,000 sets).
* Data hold & Maximum / Minimum with Time stamp.
* Data Memory and READ function.
* Alarm and Time setting.
* RS-232 function / Software.
* Backlight display function.
* Simple and safe to use.

Storage Battery Systems Battery Capacity Testers,
Check battery condition in seconds, with the battery in service!

* Test Condition Without Shutting Down Battery.
* Simultaneously Measure Battery Resistance, Voltage.
* Comparator Function.
* Rates Conditions as Pass, Warning, or Fail.
* Memory and Read Function
* Compact and Lightweight.
* RS232 PC Interface

* DMM talks with P.C. via RS-232 interface
* Data Logger function
* Direct input of V, A, Ohm, Hz, Cx & o C/ o F
without any further signal modification

MODEL TES-2700
* Autoranging and Auto-power-off
* 3200 count LCD with analog bar-graph
* Data-hold mode available at ohms.
* Overload protection up to 600 Vrms

MODEL TES-2712
* 3 1/2 LCD
* Data-hold and peak-hold function available
* Inductance, Capacitance & ohm measurement

* 3-3/4 Digital LCD with bar-graph
* Water-Proof ABS housing
* Auto-power off
* Ohms, Diode Audible continuity, Capacitance
input Overload protection to 600 Vrms

* Auto-power off 3-3/4 digit, 4000 count DMM with Peak Hold
* Frequency Count (Auto-Ranging)
* Inductance, Capacitance and Temperature (diode type) checks

* 1M W Impedance
* Transistor Check
* Analog tester price

* DMM talks with P.C. via RS-232 interface
* Data Logger function
* Direct input of V, A, Ohm, Hz, Cx& ℃ / ℉
without any further signal modification

Price: 9,000.00 THB

* 35 Ranges
* Capacitance Check
* Transistor gain Testing

* 0.5% Accuracy
* Overload Fuse protection
* Test Clips/Direct insert jack for easy measurement

* Analysis for 3P4W, 3P3W, 1P2W, 1P3W
* True RMS Value (V 123 and L 123 )
* Active Power (W, KW, MW, GW)
* Apparent and Reactive Power (KVA, KVAR)
* Power Factor (PF), Phase Angle (Φ)
* Energy (WH, KWH, KVARH, PFH)
* Current Measurement from 0.1mA to 3000A, Capable of Analyzing IT Standby Power Consumption to the Maximum Demand of a Factory
* Display of 35 Parameters in One Screen(3P4W)
* Programmable CT (1 to 600) and PT (1 to 3000) Ratios
* Display of Overlapped Voltage and Current Waveform
* 2.4M Memory with Programmable Interval (1 to 6000 seconds, 17000 Records for 3P4W System)
* Output of Waveform, Power Parameters and Harmonics at Command
* Large Dot Matrix LCD Display with Backlight
* Average Demand (AD in W, KW, MW)
* Maximum Demand (MD in W, KW, MW) with Programmable Period
* Harmonic Analysis to the 99th Order
* Display of 50 Harmonics in One Screen with Waveform
* Display of Waveform with Peak Values (1024 Samples/Period)
* Analysis of Total Harmonic Distortion (%THD-F)
* Graphic Phasor Diagram with 3 Phase System Parameters
* Capture 28 Transient Events (Time + Cycles) with Programmable Threshold(%)
* 3 Phase Voltage Unbalance Ratio (VUR)
* 3 Phase Voltage Unbalance Factor (d0%, d2%)
* Calculated Unbalance Current through Neutral Line (In)
* Optical isolated USB Interface
* Built-in Timer and Calendar for Data Logging
* Conductor Size: -Model 6801 30mm(approx) -Model 6802 5
* 55mm(approx),64*24mm(bus bar) -Model 3007 170mm(approx)

Quantity :

* Analysis for 3P4W, 3P3W, 1P2W, 1P3W
* True RMS Value (V 123 and L 123 )
* Active Power (W, KW, MW, GW)
* Apparent and Reactive Power (KVA, KVAR)
* Power Factor (PF), Phase Angle (Φ)
* Energy (WH, KWH, KVARH, PFH)
* Current Measurement from 0.1mA to 3000A, Capable of Analyzing IT Standby Power Consumption to the Maximum Demand of a Factory
* Display of 35 Parameters in One Screen(3P4W)
* Programmable CT (1 to 600) and PT (1 to 3000) Ratios
* Display of Overlapped Voltage and Current Waveform
* 2.4M Memory with Programmable Interval (1 to 6000 seconds, 17000 Records for 3P4W System)
* Output of Waveform, Power Parameters and Harmonics at Command
* Large Dot Matrix LCD Display with Backlight
* Average Demand (AD in W, KW, MW)
* Maximum Demand (MD in W, KW, MW) with Programmable Period
* Harmonic Analysis to the 99th Order
* Display of 50 Harmonics in One Screen with Waveform
* Display of Waveform with Peak Values (1024 Samples/Period)
* Analysis of Total Harmonic Distortion (%THD-F)
* Graphic Phasor Diagram with 3 Phase System Parameters
* Capture 28 Transient Events (Time + Cycles) with Programmable Threshold(%)
* 3 Phase Voltage Unbalance Ratio (VUR)
* 3 Phase Voltage Unbalance Factor (d0%, d2%)
* Calculated Unbalance Current through Neutral Line (In)
* Optical isolated USB Interface
* Built-in Timer and Calendar for Data Logging
* Conductor Size: -Model 6801 30mm(approx) -Model 6802 5
* 55mm(approx),64*24mm(bus bar) -Model 3007 170mm(approx)

Quantity :

* Analysis for 3P4W, 3P3W, 1P2W, 1P3W
* True RMS Value (V 123 and L 123 )
* Active Power (W, KW, MW, GW)
* Apparent and Reactive Power (KVA, KVAR)
* Power Factor (PF), Phase Angle (Φ)
* Energy (WH, KWH, KVARH, PFH)
* Current Measurement from 0.1mA to 3000A, Capable of Analyzing IT Standby Power Consumption to the Maximum Demand of a Factory
* Display of 35 Parameters in One Screen(3P4W)
* Programmable CT (1 to 600) and PT (1 to 3000) Ratios
* Display of Overlapped Voltage and Current Waveform
* 2.4M Memory with Programmable Interval (1 to 6000 seconds, 17000 Records for 3P4W System)
* Output of Waveform, Power Parameters and Harmonics at Command
* Large Dot Matrix LCD Display with Backlight
* Average Demand (AD in W, KW, MW)
* Maximum Demand (MD in W, KW, MW) with Programmable Period
* Harmonic Analysis to the 99th Order
* Display of 50 Harmonics in One Screen with Waveform
* Display of Waveform with Peak Values (1024 Samples/Period)
* Analysis of Total Harmonic Distortion (%THD-F)
* Graphic Phasor Diagram with 3 Phase System Parameters
* Capture 28 Transient Events (Time + Cycles) with Programmable Threshold(%)
* 3 Phase Voltage Unbalance Ratio (VUR)
* 3 Phase Voltage Unbalance Factor (d0%, d2%)
* Calculated Unbalance Current through Neutral Line (In)
* Optical isolated USB Interface
* Built-in Timer and Calendar for Data Logging
* Conductor Size: -Model 6801 30mm(approx) -Model 6802 5
* 55mm(approx),64*24mm(bus bar) -Model 3007 170mm(approx)

Quantity :

* 10 Display Easy - to - View LCD Screen.
* Connectors for 4 Current Sensing Clamps.
* 1P2W, 1P3W, 3P3W2M & 3P4W Power Measurement.
* True RMS Sensing.
* Power KW, KVAR, KVA, PF, θ ,Hz, & Energy KWh, KVARh & KVAh Measurement.
* Phase sequency indicator function.
* Backlight display function.
* Manual Data Memory and Read (99 sets).
* Data Logging (512KB Memory, 20,000 sets)
* Programmable Trigger - Points and Start / Stop Time.
* RS-232 Optical Interface with three phase voltage / current Waveform display and Harmonic analysis.
* Easy - to - use Push - Button Operation.
* Light Weight, Portable Design.

* ℃ / ℉ Selectable
* Back-light LCD display
* Laser targeting
* Emissivity adjustable (1327/1327K)
* Audible and visible alarm (1327/1327K)
* Data memory and read function (1327/1327K)

Price: 6,000.00 THB

* ℃ / ℉ Selectable
* Back-light LCD display
* Laser targeting
* Emissivity adjustable (1327/1327K)
* Audible and visible alarm (1327/1327K)
* Data memory and read function (1327/1327K)

Price: 12,500.00 THB

- 2 ระบบในเครื่องเดียวกัน อินฟราเรด เทอร์มอมิเตอร์
- ย่านการวัด : -20 °C ถึง 500 °C (-4 F ถึง 932 )
- ความละเอียด : 1 °C / 1° F
- ความแม่นยำ : ±3% rdg หรือ ± 3°C
- ความยาวคลื่น : 8 ~ 14 mm
- ขอบเขตของกาครวัด อัตราส่วน 8 : 1 ระหว่างระยะทางกับขนาดของเป้าหมายต่ำสุด 1 นิ้ว
- ฟังก์ชันปิดเครื่องอัตโนมัติ : ~15 วินาที

Quantity :